How to install a bidet toilet seat?
You can install a bidet toilet seat without any plumbing experiences. Yes, that's true! Bidet toilet seats are designed to be installed by anyone.
All parts needed for installing the bidet seat are included. (The T-valve connector for standard installation and extra water hose are included.)
Included- bolts, hardware, hinge, mounting kit, supply lines, T valve connector.
Not included- wrench
With a few simple steps, it's easy to self-install in under an hour- no plumbers necessary! You can install it without any tools, but we recommend you to use wrenches for easier installation.
*A bidet toilet seat will be connected to your home's water supply- means the bidet water is as clean as the water from your shower or sink.
How to install a bidet seat in 7 steps!
Step 1. Turn off your water and flush the water tank to empty. Then remove the existing water hose.
Step 2. Screw the spare nut with washer firmly before installing the T-valve.
Step 3. Install the T-valve on the top of the spare nut and washer.
Step 4. Connect the hose from the water tank to the T-valve.
Step 5. After removing your existing seat, place the base plate. Then, place the bolt cases over each holes and insert the bolts through the plate. Screw nuts loosely at this time.
Step 6. Attach and adjust the seat. Slide it until it clicks into the plate. after adjusting the seat, screw the nuts firmly.
*If you want to detach the unit, keep pressing the button in the lower right of the unit and slide-out the unit forward.
Step 7.Connect the attached hose to T-valve. And turn on water. Then connect to power.
Here's a direct link for a quick installation tutorial!
How To Install Hulife Bidet Toilet Seat- HLB-3000EC, Touch Control Panel
How To Install Hulife Bidet Toilet Seat- HLB-3000ER, Wireless Remote Control
Additionally, here's a direct link for a user guide tutorial!
How To Use Hulife Bidet Toilet Seat- HLB-3000EC, Touch Control Panel
How To Use Hulife Bidet Toilet Seat- HLB-3000ER, Wireless Remote Control